Brinell Optical Measuring System BH-10C
Introduction:
- Almost all the current Brinell Hardness Testers measure indentation with traditional mechanical reading microscope. It a sks for high visual reading precision, which could be easily influenced by environmental factors. Moreover, the visual-read diameter has to manually record. After measured at least twice getting average value, the operator has to look up to the hardness table to look for the corresponding Brinell Hardness value.
- BH-10C is Auto-Brinell Optical Measuring System developed based on Windows operating system. It can be used in connect with any kind of Brinell Hardness Tester on the market, automatically gets the Brinell hardness and will replace traditional mechanical reading microscope.
- BH-10C applies advanced visual technology, shooting the indentation by portable digital microscope and identifying the indentation precisely even under complex background to measure Brinell hardness. Operator needn't predicate edge of the indentation, record indentation length, and check hardness table. BH-10C can realize auto-measuring, auto-recording, auto-saving and auto-generating hardness measuring chart.
- A professional operator needs about two minutes when completing one measurement by mechanical reading microscope ,which leads to low efficiency. And propagating errors will be caused during measuring while the operation of BH-10C needs no professional operator, and the Brinell hardness will precisely come out within one second.
Application:
BH-10C can be used in lab, and also can be used in connect with Windows tablet PC and laptop on site.
Features:
1. Streamlined Design
Portable microscope applies steam-line design. It bears delicate appearance and comfortable hand feeling.
2. Magnetic Probe
The contact surface of measuring microscope applies ring magnet, making it adsorbs vertically on the magnetic specimen without help of hands.
3. HD Image
Microscope applies LED cold light source, high definition optical system and CMOS digital camera. Indentation can clearly re-appear in image .
4. Auto-Identification
BH-10C can identify indentation edge automatically, and measuring indentation circle automatically (above 200 points for one circle). It calculates diameter and gets Brinell hardness automatically. For large indentation, the whole indentation need't show up, more than 1/2 indentation appear on the interface can be measured.
5. One-key Measuring
BH-10C has a simple and generous interface, operator can use without professional training.There is no need to do manual selection, just one key operation, the indentation diameter and hardness value will come out.
BH-10C also reserves the basic selection function like Two-point, Three-point, and whole selection. Image magnification can be used in manual measuring, improving manual measuring precision.
6. Easy Calibration
BH-10C initial calibration can be done with glass scale and Brinell standard hardness block. After calibrating a scale (K value), it needn't do calibration again when the measuring scale is changed,we can directly measure in new scale.
7.Report Output
BH-10C displays indentation diameter, measuring value, Max, Min, conversion value (HRA, HRB,HRC,HV,HS, tensile strength, etc.). Auto saving indentation image, and department and operator can be user defined. Word, Excel can be generated automatically without manual record.
8. Strong Compatibility
BH-10C can be used in connect with any kind of Brinell Hardness Tester, compatible with WIN7, WIN8, WIN10.
9. Technical Specifications
| Mode |
BH-10C |
| Camera Field of View |
3.3x2.2mm |
| Measuring Range |
8~650HBW |
| Indentation Resolution |
0.01mm |
| Hardness Resolution |
1HBW |
| Measuring Accuracy |
±1%(HBW10/3000) |
| Compatible Indenter |
10mm and 5mm steel ball |
| Indentation Length |
1.2~6mm |
| Operating System |
Win7, Win8, Win10 |
Standard Delivery:
| Product Name |
Quantity |
| BH-10C 10mm/5mm Reading Microscope |
1 |
| 200 HBW10/3000 Standard Hardness Block |
1 |
| USB Microscope Video Cable |
1 |
| Software Disk |
1 |
| Accessories Box |
1 |
| Software Manual Operation |
1 |
Optional Delivery:
| Product Name |
Name |
2.5mm Reading Microscope
BH-10C |
Windows tablet PC |
Exhibition
Our Partner
Company Profile
SHENZHEN PRIDE INSTRUMENT INC.,Founded in 2001,our company specializes in development,manufacturing,markting and sales of measurement instrucments and equipment.We have been operating on the four management concepts:Quality,Speed,Innovation and Responsibility.SHENZHEN PRIDE INSTRUMENT INC. has been devoted to innovations R&D uncreasingly and has accumulated years of experiences in design and manufacturing.Our products sold all over the world,our friends are all over the world.Our company introduced the ISO9001 Iternational quality assurance operation system,our products approved by CE,ROHS.
OUR PRODUCTSLINES:
1.MEASURING TOOLS
2.HARDNESS TESTING
3.METALLOGRAPHY
4.FORCE & TORQUE
5.NDT INSPECTION
6.ELECTRICAL INSTRUMENT
7.OPTICAL INSTRUMENTS
8.MATERIAL TESTING
9.PAINT TESTING
FAQ
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 20-45days for order quantity more than 1000.
Q3. Do you have any MOQ limit for order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Audited Supplier 
){kind=link}
){kind=link}