Twin Rockwell Hardness Tester Rh-100RS

• Customization: Available
• Type: Rockwell Hardness Tester
• Application: Metal
• Model NO.: RH-100RS
• Warranty: 1 Year
• Mobility: Desktop
• Calibrating Method: Standard Hardness Test Blocks
• Rated Voltage: AC220V+- 5%; 50Hz ~ 60Hz
• Support Language: English
• Customized: Non-Customized
• Transport Package: Wooden Case
• Specification: 487 x265 x726mm
• Trademark: Pride
• Origin: Shenzhen, China
• HS Code: 90241020
• Production Capacity: 1000pieces/Month

Product Description

Rockwell Twin Hardness Tester RH-100RS

1.Technical Data

Technical parameters of Rockwell hardness
Rockwell hardness test force
->  Preliminary test force (Tolerance: ± 2.0%): 98.07N (10kg)                
->  Total test force (Tolerance: ± 1.0%): 588.4N (60kg), 980.7N (100kg) 1471N (150kg)
indenter: Diamond cone indenter, Ф1.5875mm ball indenter
Metallic materials testing applications, the most commonly used scale is A, B, C.
In conformity with the above principles should be preferred.

Rear sight	Indenter	Total test fore	Reference symbol	Effective range
C	Diamond cone	1471N(150 kgf )	HRC	20 ~ 70 HRC
A	Diamond cone	588 N(60 kgf )	HRA	20 ~ 88 HRA
B	1.588  Ball	981 N(100 kgf)	HRB	20 ~ 100 HRB

 
C scale indenter is 120 ° diamond cone total test force of 1471 Newtons 150 kg force,for the determination of heat-treated steel products
A scale indenter is 120 ° diamond cone total test force is 588.4 Newton 60 kg force, for the determination of hardness exceeding 70HRC metals such as tungsten carbide, etc. can also be used to determine the hard sheet material and a thin surface layer hardness.
B 1.588 scale indenter ball diameter of 980.7 total test force Newton 100 kg force, for the determination of soft or medium hardness of the metal and non-hardened steel products.

It should be based on the type of sample material or estimates select the appropriate hardness scale of hardness measurements. Beyond the corresponding measuring scale measurement range can cause reduced accuracy or damaged head.

2.Superficial Rockwell hardness test basis
Superficial Rockwell hardness test principle and test methods and Rockwell hardness tester is basically the same, except that the test force loading and formulas.Press table selection of test parameters when Rockwell test

Rear sight	Indenter	Total test force	Reference symbol	Effective range
15N	120°Diamond cone	147 N   15 kgf	HR15N	70 ~ 94 HR15N
30N	120°Diamond cone	294 N   30 kgf	HR30N	42 ~ 86HR30N
45N	120°Diamond cone	441 N   45 kgf	HR45N	20 ~ 78HR45N
15T	1.588  Ball	147 N   15 kgf	HR15T	62 ~ 94HR15T
30T	1.588  Ball	294 N   30 kgf	HR30T	15 ~ 82HR30T
45T	1.588  Ball	441 N   45 kgf	HR45T	8 ~ 76HR45T

 
Rockwell hardness technical parameters
Superficial Rockwell test force
->  Preliminary test force (Tolerance: ± 2.0%): 29.42N (3kg)  
->  Total test force (Tolerance: ± 1.0%): 147.1N (15kg), 294.2 (30kg), 441.3 (45kg)
Indenter: Diamond cone indenter, Ф1.5875mm ball indenter

Dual Rockwell hardness - General technical conditions                                          Dual Rockwell hardness dial

Power supply voltage: AC220V ± 5%; 50HZ ~ 60Hz power outlet must use three-pin
socket,the ground terminal of the grounding protection must comply with the requirements
Delay control is adjustable from 1 to 99 seconds
test piece was allowed maximum height: 255mm
The maximum distance between the indenter center to machine wall: 165mm
Dimensions (L × W × H) 487 × 265 × 726mm
Weight Approx: 80kg

             
Red circle in the B scale hardness intermediate ring C / A to C and A scale hardness scale indication. Black outer surface Rockwell N / T hardness scale indication.

Rockwell and Superficial Rockwell hardness test force early handover        
Rockwell and Superficial Rockwell hardness test force early are 10Kgf and 3Kgf. By rotating the lower end of the spindle seat adjustment nut Preliminary test force to achieve switching. SR direction to rotate Rockwell Preliminary test force (3Kgf), the direction of rotation R Rockwell Preliminary test force (10Kgf).






Exhibition

 

Our Partner 

Company Profile
SHENZHEN PRIDE INSTRUMENT INC.,Founded in 2001,our company specializes in development,manufacturing,markting and sales of measurement instrucments and equipment.We have been operating on the four management concepts:Quality,Speed,Innovation and Responsibility.SHENZHEN PRIDE INSTRUMENT INC. has been devoted to innovations R&D uncreasingly and has accumulated years of experiences in design and manufacturing.Our products sold all over the world,our friends are all over the world.Our company introduced the ISO9001 Iternational quality assurance operation system,our products approved by CE,ROHS.
OUR PRODUCTSLINES:
1.MEASURING TOOLS
2.HARDNESS TESTING
3.METALLOGRAPHY
4.FORCE & TORQUE
5.NDT INSPECTION
6.ELECTRICAL INSTRUMENT
7.OPTICAL INSTRUMENTS
8.MATERIAL TESTING
9.PAINT TESTING







FAQ
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 20-45days  for order quantity more than 1000. 
Q3. Do you have any MOQ limit for order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.