| Customization: | Available |
|---|---|
| Type: | Micro Hardness Tester |
| Measuring Range: | 5 Hv ~ 3000 Hv |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model No. | MV-1000L |
| Lens/Indenter switch | With Motorized Turret |
| Test force | 0.0981,0.2452,0.4903,0.9807,1.961,2.942,4.903,9.807 ( N) 10, 25, 50, 100, 200, 300, 500, 1000 (gf) |
| Loading mode | Program-controlled application, duration and removal of load |
| Accuracy | 0.1%-0.5% |
| Duration time | 5-60 sec selectable (In step of ) 5 sec. |
| Measuring range | Above 5 HV - 3000 HV(accuracy within 3%) |
| Total Magnification | Objective: 40x; 10x(For observation), Eyepiece: 15x Total: 600x; 150x (For observation) |
| Viewing area | 200um |
| Min. detection | 0.025µm |
| X-Y stage | Dimensions:100×100mm Travel range:25×25 mm Resolution:1/100mm |
| Optical path | Measurement / Photo switch |
| Measuring mode | After taking D1(D2) with the eyepiece and entering them, the hardness value is displayed on LCD. The data can be printed out. |
| Data output | RS-232 interface |
| Max.test height | 85mm |
| International standards | ISO 6507, ASTM E384, JIS B7734 |
| Standard accessory | Eyepiece 15X,Objective 40x,10x, Vickers indenter,X-Y stage,Hardness block(700HV1 400HV0.2),Thin piece clamp,small bearing clamp,Precision vise,level,Bulb,Cable,Fuse,Inside printer,manual |
| Options | Digit microscopic eyepiece SDE-100 with software The third objective Digital camera & adaptor |
| Power supply | 220 VAC, 50/60 Hz |
| Dimensions | 560 × 210 × 455 mm |
| Net weight | 40kg |
| Gross weight | 60 kg |
){kind=link}