| Customization: | Available |
|---|---|
| Type: | Micro Hardness Tester |
| Measuring Range: | 5 Hv-3000 Hv |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model No. | MV-1000DL | MV-1000DLY |
| Lens/Indenter switch | With Motorized Turret | |
| Objective/HV/HK (MV-1000DLY) | ||
| Test force | 0.0981,0.2452,0.4903,0.9807,1.961,2.942,4.903,9.807 ( N) 10, 25, 50, 100, 200, 300, 500, 1000 (gf) |
|
| Loading mode | Program-controlled application, duration and removal of load | |
| Duration time | 5-60 sec selectable (In step of ) 5 sec. | |
| Measuring range | 5 HV - 3000 HV above | |
| Total Magnification | Objective: 40x; 10x(For observation), Eyepiece: 15x Total: 600x; 150x (For observation) |
|
| Min. detection | 0.025µm | |
| X-Y stage | Dimensions:100×100mm Travel range:25×25 mm Resolution:1/100mm |
|
| Optical path | Measurement / Photo switch | |
| Measuring mode | With eyepiece digital display, Display on LCD: Load, Duration time, Diagonal lengths, Hardness values, Min, Max, Average, Divergence,, Standard deviations, converted HRC HRA values, and etc. A test result is provided with the built-in printer. | |
| Data output | RS-232 interface | |
| Max.test height | 85mm | |
| Standards concerned | ISO 6507, ASTM E384, JIS B7734 | |
| Standard attachments | Eyepiece 15X,Objective 40x,10x, Vickers indenter,X-Y stage,Hardness block(700HV1 400HV0.2),Thin piece clamp,small bearing clamp,Precision vise,level,Bulb,Cable,Fuse,Inside printer,manual | |
| Options | Digit microscopic eyepiece with software Can work 3 objectives more Digital camera & adaptor |
|
| Power supply | 220 VAC, 50/60 Hz | |
| Dimensions | 560 × 210 × 455 mm | |
| Gross weight | 60 kg | |
){kind=link}