Coating Thickness Gauge 2 Measuring Modes Are Available: Continuing Measuring Mode (CONTINUE) and Single Measuring Mode (SINGLE)

• Operating Principle: Magnetic Induction
• Storage Function: 495 Measuring Values Can Be Stored
• Measuring Range (mm): 0-400
• Low Range Resolution(mm): 0.1
• Min Curvature Radius (mm): Convex
• Critical Thickness of Substrate (mm): 0.3
• Model NO.: CG510PL
• Transport Package: Case
• Specification: 155mmx68mmx27 mm
• Trademark: Pride
• Origin: China
• HS Code: 9017300000
• Production Capacity: 300pieces/Month

Product Description

Coating Thickness Gauge CG510PL
 
Features:

Two thickness measuring methods adopted, the gauge can be applied to thickness measuring of non-magnetic coating on magnetic metal substrate as well as non-conductive coating on non-magnetic metal substrate; 
5 types of probes can be used (F400, F1, F10, N1, CN02,);
2 measuring modes are available: continuing measuring mode(CONTINUE)and single measuring mode(SINGLE);
2 operation modes are available: direct mode (DIRECT) and batch mode (A-B);
5 statistic values:mean value(MEAN), max. value(MAX), min. value(MIN), numbers of measuring(NO.), standard deviation(S.DEV);
2 methods can be used to calibrate the gauge, and the system error of the probe can be corrected by use of basic calibrating method: 
Storage function: 495 measuring values can be stored; 
Deletion function: delete the single questionable data occurring in measuring, as well as all of the data in memory area to perform the new measuring;
Limit can be set: capable of alarming automatically for measuring values out of limit; and a batch of measuring values can be analyzed via histogram; 
Printing function: measuring value, statistic value, limit and histogram can be printed; 
Capable of communication with PC: measuring values and statistic values can be sent to PC to perform the further process for data; 
Indication of low voltage;
Buzzing indication in the course of operation;
With the function of error warning, error warning can be carried out through display or buzzing;
Two shut down modes are available: manual shut down mode and automatic shut down mode;

 

INTERNATIONAL STANDARDS:

ASTM B 499, ASTM D 1400, BS 3900-C5-6B, DIN 50981,DIN 50984, ISO 1461,ISO 2360  

Technical parameters

Probe model		F400		F1		F1/90°	F5	F10
Operating principle		Magnetic induction
Measuring range (mm)		0~400		0~1250			0~5000	0~10000
Low range resolution(mm)		0.1		0.1			1	10
Accuracy	One-point calibration (mm)	±(3%H+1)					±(3%H+5)	±(3%H+10)
	Two-point calibration (mm)	±((1~3)%H+0.7)		±((1~3)%H+1)			±((1~3)%H+5)	±((1~3)%H+10)
Measuring conditions	Min curvature radius (mm)	Convex	1	1.5	Flatten		5	10
	Diameter of the min area (mm)	F3		F7	F7		F20	F40
	Critical thickness of substrate (mm)	0.2		0.5	0.5		1	2

  

Probe model		N400			N1	N1/90°	CN02		N10
Operating principle		Eddy current
Measuring range (mm)		0~400 (Chrome on copper		0~1250 0~40)				10~200	0~10000
Low range resolution(mm)		0.1		0.1				1	10
Accuracy	One-point calibration (mm)	±(3%H+0.7)		±(3%H+1.5)				±(3%H+1)	±(3%H+25)
	Two-point calibration (mm)	±[(1~3)%H+0.7]		±[(1~3)%H+1.5]				___	±[(1~3)%H+25]
Measuring conditions	Min curvature radius (mm)	Convex	1.5	3		Flatten		Only flatten	25
	Diameter of the min area (mm)	F4		F5		F5		F7	F50
	Critical thickness of substrate (mm)	0.3		0.3		0.3		No limit	50mm aluminum foil

Note: H--Nominal value
   
Table 1 for probe selection reference   

Coating Substrate		Non-magnetic coating of organic material (such as painting, finishes, enamel, porcelain enamel, plastic, anodization and etc.
		Coating thickness≤100mm	Coating thickness > 100mm
Magnetic metal such as iron, steel and etc.	Measured area Dia. > 30mm	Probe F1     0~1250mm Probe F400   0~400mm	Probe F1     0~1250mm Probe F5     0~5mm Probe F10    0~10mm
	Measured area Dia. < 30mm	Probe F400   0~400mm	Probe F1     0~1250mm Probe F400   0~400mm
Non-ferrous metal such as copper, aluminum, brass, zinc, tin and etc.	Measured area Dia.> 10mm	Probe N1     0~1250mm Probe N400   0~400mm	Probe N1     0~1250mm Probe N10    0~10mm Probe N400   0~400mm
	Measured area Dia. < 10mm	Probe N1     0~1250mm Probe N400   0~400mm	Probe N1     0~1250mm Probe N400   0~400mm

 
 Table 2 for probe selection reference

Coating   Substrate		Non-magnetic non-ferrous metal coating (such as chrome, zinc, aluminum, copper, tin, silver and etc.)
		Coating thickness≤ 100mm	Coating thickness > 100mm
Magnetic metal such as iron, steel and etc.	Measured area Dia. > 30mm	Probe F1     0~1250mm Probe F400   0~400mm	Probe F1     0~1250mm     Probe F5     0~5mm Probe F10    0~10mm Probe F400   0~400mm
	Measured area Dia. < 30mm	Probe F1     0~1250mm Probe F400   0~400mm	Probe F1    0~1250mm Probe F400   0~400µm
Non-ferrous metal such as copper, aluminum, brass, zinc, tin and etc.	Measured area Dia. > 10mm	Only for chrome coating on copper Probe N1     0~1250mm Probe N400   0~40mm	--------
	Measured area Dia. < 10mm	--------	--------
Non-metal such as plastic, printing circuit and etc.	Measured area  is big	Probe CN02   10~200mm	Probe CN02   10~200mm

 


Exhibition

 

Our Partner 

Company Profile
SHENZHEN PRIDE INSTRUMENT INC.,Founded in 2001,our company specializes in development,manufacturing,markting and sales of measurement instrucments and equipment.We have been operating on the four management concepts:Quality,Speed,Innovation and Responsibility.SHENZHEN PRIDE INSTRUMENT INC. has been devoted to innovations R&D uncreasingly and has accumulated years of experiences in design and manufacturing.Our products sold all over the world,our friends are all over the world.Our company introduced the ISO9001 Iternational quality assurance operation system,our products approved by CE,ROHS.
OUR PRODUCTSLINES:
1.MEASURING TOOLS
2.HARDNESS TESTING
3.METALLOGRAPHY
4.FORCE & TORQUE
5.NDT INSPECTION
6.ELECTRICAL INSTRUMENT
7.OPTICAL INSTRUMENTS
8.MATERIAL TESTING
9.PAINT TESTING








FAQ
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 20-45days  for order quantity more than 1000. 
Q3. Do you have any MOQ limit for order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.